Feature

Axial cylindrical roller bearings comprise axial cylindrical roller and cage assemblies K, GS seat ring and the shaft WS components.
Bearing has a very small axial section height, high load carrying capacity, high rigidity and can support axial forces in one direction.
Bearings 811 and 812 series are single row bearings, 893,894 series double row bearings.
Cage material is nylon or brass.
Axial cylindrical roller and cage assembly
Cage assembly by a thrust cage and one or two cylindrical roller composition.
Diameter series 1,2,3,4 standard DIN 616 / ISO 104.
Cage material is nylon or brass and the shaft guide as the standard mode.
Cage assembly has a very small axial section height and high load carrying capacity.
They can support axial forces in one direction. Radial force must be borne by the other components.
Axial cage assemblies and shaft or housing ring used together or directly integrated on the adjacent structure. If you do not use with axial bearing washers, then they need to follow the rolling bearing raceway raceway processing.
Seat
Seat and seat hole center must be aligned, if the adjacent surface structure can not be run as it is necessary to use race. ID, OD and running surfaces must be finishing.
Shaft ring
Seat must be aligned with the center axis, if the adjacent surface structure can not be run as it is necessary to use the shaft ring. ID, OD and running surfaces must be finishing.
Bearing washers
The bearing shaft washer is used as race or ring only for those that do not require precise alignment applications. Inner and outer diameters vehicle processing, grinding running surface.
Bearing washers can thrust cylindrical roller and cage assembly K811 or thrust needle roller and cage assemblies AXK together.
Operating temperature
Thrust cylindrical roller bearings and cylindrical roller thrust cage assembly operating temperature range of -20 ℃ to + 120 ℃.
Existing design